TESTUPS
Anechoic chambers

Anechoic chambers: a quiet, known space for radiated measurements.

Radiated tests need two things: no outside signals, and no reflections from the walls. Shielding keeps the outside out; absorber deals with the reflections.

Semi-anechoic or fully anechoic?

Where the absorber sits defines the type. A semi-anechoic chamber (SAC) has absorber on the walls and ceiling and a reflective metal floor; most commercial radiated-emission standards are written for this "open area test site" geometry. A fully anechoic chamber (FAC) also lines the floor, which suits radiated-immunity testing and some emission methods.

Size follows the test distance

Chambers are usually described by the antenna-to-product distance they support: 3 m, 5 m or 10 m. CISPR and ANSI emission methods measure at 3 m and 10 m. The chamber also has to fit the turntable, the antenna mast with its height scan, and the largest product you will test.

Absorber and validation

  • Pyramidal and flat foam absorber; ferrite tiles and hybrid linings as part of a chamber project
  • The absorber is chosen for the lowest and highest frequency you need to cover
  • Site validation support on request: normalized site attenuation (NSA) and SVSWR measurements, within the scope agreed for the project

Go deeper on testups.com

Planning an EMC lab or an upgrade?

TESTUPS designs, sources and supplies EMC chambers, test systems and components, and supports installation, site validation and accreditation preparation.